WinRAR v4.20 Final Full (en-vi) - Phần mềm hỗ trợ giải nén tốt nhất

Professor T

Thành viên cực thân
Thành viên thân thiết
Tham gia
12/11/2010
Bài viết
1.249
Có thể nói WinRAR là phần mềm nén/giải nén phổ biến và tốt nhất hiện nay. Tuy sinh sau người anh em là WinZip nhưng hiện nay WinRAR đã hoàn toàn qua mặt WinZip về chất lượng nén file và tính dễ sử dụng. Với WinRAR, việc nén/giải nén file trở nên cực kì dễ dàng với vài cú nhấp chuột và tính năng tạo file tự chạy (Self-extracting) của WinRAR đã trở nên cực kì chuyên nghiệp. Ngoài ra, WinRAR còn có thể cắt file nén ra nhiều phần và đặt mật khẩu để bảo vệ tính riêng tư cho file nén. Dù hiện nay đã xuất hiện các loại file nén khác như .UHA, .7z, .KGB nhưng WinRAR vẫn là lựa chọn số 1.

Các đặc tính của WinRAR:

* Sử dụng WinRAR làm bạn nổi trội hơn khi có nhu cầu nén file, nó giúp bạn tạo các file lưu trữ nhỏ hơn so với các đối thủ, tiết kiệm lưu lượng đĩa và chi phí chuyển tải.
* WinRAR cung cấp sự hỗ trợ đầy đủ cho các file lưu trữ dạng RAR và ZIP archives và có thể giản nén các file lưu trữ CAB, ARJ, LZH, TAR, GZ, ACE, UUE, BZ2, JAR, ISO, 7Z, Z.
* WinRAR có giao diện tương tác đồ họa tận dụng các menu và chuột cũng như giao diện dòng lệnh.
* WinRAR dễ sử dụng hơn so với các trình lưu trữ khác với chế độ "wizard" đặc biệt cho phép truy cập nhanh đến các chức năng lưu trữ cơ bản thông qua tiến trình hỏi đáp đơn giản. Điều này tránh sự nhầm lẫn ở các bước sử dụng đầu tiên.
* WinRAR cung cấp các lợi ích về sự mã hóa lưu trữ sử dụng AES (Chuẩn mã hóa tiên tiến) với khóa 128 bits.
* WinRAR hỗ trợ các file và các lưu trữ có kích cỡ lên đến 8,589 tỉ gigabytes. Số file lưu trữ với các mục đích thực tế không giới hạn.
* WinRAR cung cấp khả năng tạo file tự trích xuất và các archives đa đĩa
* Phục hồi các file ghi và các ổ đĩa cho phép tái tạo ngay cả khi các file lưu trữ bị hư hỏng vật lý.
* Các tính năng của WinRAR được phát triển để làm cho WinRAR là một tiện ích hàng đầu.

KSV-14.png

Các đổi mới trong bản 4.20:
WinRAR - What's new in the latest version


Version 4.20

1. Changes in RAR compression:

a) RAR general compression algorithm is optimized for better
utilization of several processor cores. While some speed gain
is possible even in single processor mode, best results
are achieved in multi-core environment.

Speed gain depends on data type and average file size.
Several cores are utilized more efficiently when compressing
large files.

b) we had to increase memory requirements to achieve higher
compression speed. General RAR compression algorithm allocates
about 120 MB comparing to 40 MB in WinRAR 4.11;

c) RAR text compression algorithm cannot utilize several CPU cores
efficiently, so its performance in multiprocessor environment
is much lower than for general algorithm. Also its decompression
speed is much lower than in general algorithm regardless of
CPU number. So we decided to disable the text algorithm by default.

If you need maximum possible compression ratio for plain text data
regardless of speed, you can enable the text compression
in "Advanced compression parameter" dialog. Press "Compression..."
button on "Advanced" page of archiving dialog to access it.
You can also change this option permanently in default compression
profile;

In the command line mode the text compression can be enabled
with -mct switch;

d) "Fastest" (-m1) compression mode also supports several processor
cores now. In 4.11 it could use only a single processor core.

2. RAR general decompression algorithm speed is slightly improved,
though not to same extent as RAR compression. RAR decompression
is not able to use several processor cores, so its performance
does not depend on a number of cores.

3. Changes in ZIP compression:

a) now ZIP compression supports several processor cores resulting
in noticeably higher performance in multi-core environment.
Single CPU ZIP compression is also faster than in 4.11;

b) memory use for ZIP compression is increased to about 15 MB.

4. Recovery volume creating and processing can use several CPU cores
resulting in higher speed. Though, typically hard drive seek speed
is a limiting factor for recovery volumes, so this gain is most
noticeable when working with solid state drive.

5. Now the allowed value for -mt switch is 1 - 32,
not 0 - 16 as before.

6. "Find files" command can search data in 7-Zip archives.
Previously "Find files" did not support .7z archive format.

7. Windows 2000 is not supported by WinRAR and WinRAR self-extracting
modules anymore.

8. "Save current settings" button in "Advanced SFX options" dialog
is now available only when converting an existing archive to SFX.
Options saved with this button are applied only to convert to SFX
operation.

If you create or update SFX archive, only SFX options stored
in default compression profile are used. Options saved
in "Advanced SFX options" dialog are ignored for these operations.

Download


(Nguồn: thuthuat.chiplove.biz)​
 
×
Quay lại
Top